Flexible PCB

Flexible PCB

Flexible Printed Circuit Boards (FPCs) are designed to be bendable and can be easily flexed or twisted without damaging the circuitry.They are manufactured using thin, flexible substrates such as polyimide or polyester film, with conductive tracks etched onto their surface. FPCs are commonly used in applications where space is limited and flexibility is required, such as mobile devices, medical equipment, and aerospace technology. Flexible PCBs offer advantages such as lightweight, durability, and high temperature resistance.

Advantages of flexible PCBs:
● Flexibility: Bendable and adaptable to complex shapes.
● Lightweight: Smaller and lighter than rigid PCBs.
● Durability: Resistant to vibration, shock, and temperature extremes.
● Design freedom: Accommodate complex layouts and customizations.
● Cost-effective: Simplify assembly and reduce costs.
● Reliability: Long-lasting and durable.

Flexible PCB Production Capability

Item Prototype Order Medium Batches Order
Product structure F+R, Cu+F+Cu, R+F+R+F+R, R+F+R F+R, Cu+F+Cu, R+F+R+F+R, R+F+R
Layers 16L 10L
Board thickness (mm) 0.06-0.35 0.06-0.35
Board size(mm) 5*15 to 310*510 5*15 to 310*510
Maximum copper thickness (OZ) Outer layer 2 OZ, inner layer 2 OZ Outer layer 1 OZ, inner layer 1 OZ
Minimum copper trace width and spacing(μm) 75/75 75/75
Minimum diameter of mechanical drill (mm) 0.15 0.2
Material PI DuPont, Panasonic, Shengyi PI DuPont, Panasonic, Shengyi
Surface insulation layer Cover film, soldermask Cover film, soldermask
Thickness of dielectric layer (mm) 0.012-0.1 0.025-0.1
Surface treatment HASL with lead / lead-free, immersion gold, OSP HASL with lead / lead-free, immersion gold, OSP

Prototype Order (Order area < 3㎡), Medium Batches Order (Order area ≥10㎡)

Surface Finishes

  • Electroless Nickel/Gold (ENIG)
  • Chemical Tin
  • Chemical Silver
  • Electroplated Nickel/Gold
  • Other finishes available upon request
  • Open-source software (It seems there might be a context mix-up here, as open-source software is not typically categorized under surface finishes for PCBs)

General Technical Specifications

  • Solder Mask
  • Photoimagable coating systems, thermally cured in final stage
  • Colors: Green, Red, Blue, Gloss Black, Matte Black, White, Yellow, Purple, Pink
  • Non-photoimagable coating systems, purely thermosetting: White, Black
  • Additional Printing
  • Identification/Assembly
  • Via Fill/Thru-Hole Fill
  • Peelable Solder Mask Layer
  • Heat Sink
  • Carbon
  • Edge Plating
  • The end face of the PCB profile can be plated to enhance the EMC protection of the PCB, to form an electrical contact with the module housing, or to meet higher cleanliness requirements.

Milled Plated-Through Holes

Specific application components can be produced with so-called milled plated-through holes. Due to possible contact on the front side, the resulting PCB can be soldered as a component onto another board (interposer).

Get Expert Advice with
a Free Consultation!